Introduction
When it comes to maintaining or Remove the Remax Trimmer Head BC200DL, one essential task is replacing or removing the trimmer head for cleaning, maintenance, or repair purposes. The trimmer head is a crucial part of your tool, as it houses the cutting line, allowing your trimmer to operate effectively. However, over time, the trimmer head can become clogged with debris, worn out, or damaged. This article provides a step-by-step guide on how to remove the trimmer head from a Remax BC200DL gas trimmer efficiently and safely.
In this guide, we will cover all the necessary tools and safety precautions, explain the process of removing the trimmer head, and share helpful tips for reassembling and maintaining the trimmer for optimal performance.
Why Should You Remove the Trimmer Head?
Before diving into the steps of removing the trimmer head, it’s important to understand why you may need to remove it in the first place. There are several reasons to remove the trimmer head from your Remax BC200DL:
- Replacing the Cutting Line: The cutting line or string is the most frequently replaced part of the trimmer. Over time, it can wear out, snap, or become tangled, necessitating removal of the trimmer head for a new line to be installed.
- Cleaning: Grass, dirt, and other debris can build up in the trimmer head, causing it to lose efficiency. Regular cleaning prevents this buildup from affecting the performance of your trimmer.
- Maintenance and Repairs: Sometimes, internal components of the trimmer head, such as the spool or spring, may need repair or replacement. In such cases, removing the trimmer head is the first step in performing repairs.
- Upgrading the Trimmer Head: If you prefer a different type of cutting head or wish to upgrade to a more efficient design, removing the current head is necessary.
Tools You’ll Need
Before proceeding with the removal of the trimmer head, gather the following tools:
- Wrench: A wrench will be necessary to loosen the trimmer head from the shaft.
- Screwdriver: A flathead screwdriver may be required to remove certain screws or parts during the disassembly process.
- Protective Gloves: Always wear gloves to protect your hands from sharp objects or debris when working with the trimmer.
- Pliers: If the trimmer head is stuck or tightly fastened, pliers can provide additional leverage.
- Cleaning Supplies: A brush or air compressor can help you clean the trimmer head once it’s removed.
Safety Precautions
Working with power tools like the Remax BC200DL trimmer requires safety precautions. Here are some important tips to ensure your safety:
- Turn off the Trimmer: Always ensure the trimmer is powered off before starting any work. If it’s a gas-powered model, disconnect the spark plug to eliminate the risk of accidental starting.
- Wear Safety Gear: Protective gloves, safety glasses, and long pants can protect you from flying debris or any potential mishaps.
- Check the Area: Ensure that the working area is clear of obstacles or tripping hazards. Keep pets and children away while you’re working.
Step-by-Step Guide to Removing the Remax BC200DL Trimmer Head
Now, let’s go over the detailed steps of removing the trimmer head from the Remax BC200DL.
Step 1: Disconnect the Spark Plug
For safety reasons, always begin by disconnecting the spark plug on your gas-powered Remax BC200DL trimmer. This prevents the engine from accidentally starting while you’re working on it.
- Locate the spark plug wire attached to the engine.
- Use a spark plug wrench to loosen the plug if needed.
- Remove the wire from the spark plug, and set it aside, ensuring it doesn’t come into contact with any metal parts.
Step 2: Identify the Trimmer Head
The Remax BC200DL trimmer head typically features a bump feed or automatic line advancement system. Before proceeding, identify the type of head on your trimmer.
- Bump Feed: This type of head feeds the line automatically when the user bumps the trimmer against the ground.
- Fixed Line: Some trimmers come with fixed-line heads where the line needs to be manually replaced.
Knowing what type of trimmer head you have will help you better understand how to remove it and avoid unnecessary steps.
Step 3: Release the Bump Head Mechanism (If Applicable)
If your Remax BC200DL features a bump feed head, the first step is to release the bump head mechanism. Here’s how:
- Hold the trimmer head in one hand to prevent it from rotating.
- With your other hand, locate the small release tab or button on the side of the trimmer head.
- Press or pull the release tab, and twist the trimmer head counterclockwise to begin loosening it.
If you’re working with a fixed-line head, skip this step.
Step 4: Use a Wrench or Pliers to Loosen the Head
For trimmer heads that are tightly fastened, you may need additional leverage. In such cases:
- Use a wrench to loosen the trimmer head by turning it counterclockwise.
- If the trimmer head is particularly stubborn, use pliers to grip it securely and gently twist in the opposite direction.
Be cautious not to apply too much force, as this could damage the head or the motor shaft.
Step 5: Remove the Trimmer Head
Once the head has been sufficiently loosened, you should be able to pull it off the motor shaft by hand. Gently slide it off, being careful not to damage the threading or any internal components.
At this stage, you may notice a spool or internal parts, such as springs or washers. Take note of the order in which these parts are arranged, as this will help you reassemble them later.
Step 6: Clean or Replace the Trimmer Head
Once removed, you can clean or replace the trimmer head as necessary. Use a brush, air compressor, or cleaning solution to remove debris and grass buildup from the head. If you’re replacing the trimmer head, ensure that the new one is compatible with your Remax BC200DL model.
If you’re cleaning the head, take extra care to clean the spool area where the trimmer line feeds. This area can accumulate dirt and oil, which can cause the trimmer to malfunction if not cleaned regularly.
Step 7: Reinstall the Trimmer Head (If Necessary)
If you need to reinstall the trimmer head after cleaning or replacing the line, follow the removal process in reverse:
- Align the trimmer head with the motor shaft.
- Slide the head back onto the shaft, ensuring the internal components are correctly positioned.
- Tighten the trimmer head by turning it clockwise.
- Secure it in place, making sure it’s firmly attached.
Troubleshooting Common Issues with the Trimmer Head
Occasionally, problems may arise when trying to remove the trimmer head or when it’s in use. Here are a few common issues and solutions:
- Trimmer Head Stuck: If the trimmer head is stuck and difficult to loosen, try using penetrating oil to help release it. Apply the oil to the threading, and allow it to sit for several minutes before attempting to remove it again.
- Damaged Components: If you notice any damaged or worn-out parts during the removal process, such as a cracked spool or worn-out spring, replace these components to restore the trimmer’s functionality.
- Over-Tightening: Be careful not to over-tighten the trimmer head when reinstalling it. Over-tightening can lead to threading damage or cause the head to become stuck again.
Conclusion
Removing the trimmer head from a Remax BC200DL is a straightforward process when done correctly. By following the steps outlined in this guide, you can safely remove, clean, replace, and reinstall the trimmer head as needed. Regular maintenance and care will ensure that your trimmer performs efficiently for years to come.
Remember to use the proper tools, take necessary safety precautions, and consult the trimmer’s manual for specific instructions regarding your model. With these simple steps, you’ll keep your Remax BC200DL trimmer running smoothly and in top condition.